Mast and boom | Forum | Twister Class Association

Forum→General Discussion→Mast and boom

Lost password?

Mast and boom

Nick Ward

7 Posts

(Offline)

25th August 2022 - 6:20 pm

Hi All,

I am just refitting my wooden twister Swift II and have a very good but old looking gold alloy mast.

Might be of interest but just had both spars wraped.

Attachments

20220825_150011.jpg (404 KB)

Allan Beswick

51 Posts

(Offline)

28th August 2022 - 8:57 pm

Could we have some detail, my spars are original so showing battle scars, whose did the work and where?

Nick Ward

7 Posts

(Offline)

7th September 2022 - 6:46 pm

Hi,

The spars were a little tired and marked so gave them a light rub down.

Had to remove all fittings and the chap came and wrapped the two spars, took him 4 hours, cost £740.

Have reasembled the spars and those fittings no longer needed just left the holes covered over.

Still on trial at the moment, will have to be super clever not to mark the vinyl when the crane lifts the mast.

Nick Ward

7 Posts

(Offline)

7th September 2022 - 6:48 pm

Sorry should have said.

Isle of Wight and any good sign company. Was done in 2 long sheets so only one join by the spreaders.

Peter Antill

6 Posts

(Offline)

10th September 2022 - 9:08 am

Hi,

I have a 30ft mast, matching boom and roller reefed forestay and stainless rigging. All alloy but not gold colour. Based at Chichester.

Peter Antill.

Peter Antill

6 Posts

(Offline)

10th September 2022 - 9:10 am

Peter Antill mob. 07768364848.

John MacMullen and Ann Musgrave

208 Posts

(Offline)

11th September 2022 - 6:53 pm

My big question ..... How durable will the wrap be? That said there is a yacht in the marina here whose topsides were wrapped several years ago and which still pass the 20 metre test with flying colours

John

Forum Timezone: Europe/London

Show Stats

Administrators: Peter Mulville, David Hopkins, Alex Hooley