Hi,
Thought some of you might be interested in this novel Table leg that would be very useful in the Twister cabin. Think Helix would love one these. Extra brackets can be obtained so it can be used in the cockpit. Seams a really great addition. The link below will take you to a demo from the sail life you tube site.
Stephen
Helix
Lagun Table legg installation and review - Part 2
Vlist=PLQyv5OlNbA-r4ChyfdWGv8m8qLZzYp6sw&index=35
I bought one and a tabletop as recommended in the video. The table top I bought was 90cm wide, which is perfect for sitting two by two in the cabin, 80 cm is a bit cramped. It's heavy mind, although the Lagune leg is rated to 60Kgs.
I also bought an extra mounting bracket for the cockpit...I plan to mount it mid height on the aft part of the cockpit well, on the inspection hatch, so the hatch an retaining clips may need beefing up. Also the 90 cm length will mean that when oriented fore and aft ,the aft end of the table will have to sit on the coaming. (80cm will fit inside the coaming). In this orientation the weight/moment of the table oriented fore and aft will be significant on the bulkhead fitting, so I may install a broom head fitting underneath the forward end and screw in a prop.
The table top I bought is heavy, so I'd consider a lighter laminated table top as suplied by Lagune. I'll report back when installed.
64
3
1 Guest(s)